Multicolor 3D printing guides
How to paint an STL in Bambu Studio, PrusaSlicer and OrcaSlicer
Short answer: All three slicers can paint an STL for free. Add one filament per color, select the model and open Color Painting (Bambu Studio, OrcaSlicer) or Multi-material painting (PrusaSlicer). Fill large areas up to sharp edges first, brush the details, and use height range for stripes. Then slice, check the preview and match the colors to the filaments in your AMS or MMU.

Before you start: set up the filaments
The painting tools paint with the project’s filaments, so set those up first.
- Bambu Studio: in the Filament section of the left sidebar, click + once for each color and set its type and color. With a printer connected, you can copy color and type from an AMS slot, or synchronize the whole filament list from the AMS before you paint.
- PrusaSlicer: select a multi-material printer profile, for example one for a printer with the MMU3. Each painted color is one of the profile’s extruders.
- OrcaSlicer: add a filament for each color to the project, then paint in the Prepare tab.
Bambu Studio: Color Painting
- Select the object and open the Color Painting tool.
- Pick a filament by clicking its color box, or press a key from 1 to 9.
- Choose a tool and paint. Ctrl and the mouse wheel change the pen size; Shift and the left mouse button erase.
| Tool | What it does |
|---|---|
| Circle | A round pen for drawing on the visible surface. It can be kept vertical or horizontal. |
| Sphere | Like Circle, but it colors every triangle inside the sphere, not only the visible ones. |
| Triangle | Colors the triangle under the pointer; drag to color several. |
| Fill | Colors connected triangles until it reaches a different color. With Edge detection on, it also stops at corners sharper than the threshold. |
| Gap fill | Finds small unpainted gaps and fills them with the color of a neighboring area, which avoids extra filament changes. |
| Height range | Colors everything between two heights, even areas that aren’t connected. |
To reach surfaces hidden behind other parts of the model, use the section view: Alt and the mouse wheel.
PrusaSlicer: Multi-material painting
Multi-material painting has been in PrusaSlicer since version 2.4. In the tool’s panel, set the First color and Second color: the left mouse button paints with the first, the right button with the second.
- Brush in three shapes: sphere, circle and triangle. For sphere and circle you set the size, and you can have bigger triangles split into smaller ones while you paint.
- Smart fill previews the region under the cursor and fills it up to a sharp edge. The threshold angle is adjustable.
- Bucket fill replaces a patch of one color with another, again with an adjustable angle.
- Height range paints everything between two horizontal lines.
Good to know: the tool handles up to 16 extruders. Painted areas too thin to print are merged into the neighboring color, so Prusa advises turning on Detect thin walls when you paint thin features. Painting also can’t be combined with XY size compensation; PrusaSlicer ignores the compensation and tells you so.
OrcaSlicer: Color Painting
OrcaSlicer draws on Bambu Studio and PrusaSlicer, and its Color Painting tool in the Prepare tab offers Circle, Sphere, Triangle, Height Range and Fill, plus a Gap Fill option that closes small unpainted gaps up to a set area size.
Two OrcaSlicer specifics: a painted top or bottom surface also colors the layers behind it, and the setting Paint Penetration Layers controls how many. And if you want a whole feature in another filament, such as all outer walls, the Filament for Features settings do that without painting.
Slice and match colors to your filaments
Slice, then step through the preview before printing. Painted borders, tiny islands of color and the flushing show up there.
With an AMS, the project’s filament list doesn’t have to match the AMS exactly. When you send the print, Bambu Studio maps each project filament to an AMS slot by material type and similar color. Check the mapping and correct it by hand if needed. In PrusaSlicer, each painted color is an extruder number, so load the filaments into the matching MMU slots.
Tips for clean color borders
- Fill first, brush second. Fill and smart fill follow the model’s edges, so large areas get crisp borders. Use the brush for the details.
- Watch the triangle size. On models made of a few large triangles, painted borders can come out coarse. PrusaSlicer can split bigger triangles while you paint.
- Keep the colors few and together. On a single-nozzle printer, each color change means flushing out the old filament, which costs filament and time.
- Save the project as 3MF. The painting lives in the project, not in the STL.
When to paint outside the slicer
We make MeshGlaze, an app for painting 3D models on iPad, iPhone and Android, so keep that in mind: if the slicer tools above do what you need, you don’t need another app. Painting elsewhere helps mainly with freehand detail and when you’d rather paint away from the computer. MeshGlaze exports a painted 3MF for Bambu Studio, PrusaSlicer and OrcaSlicer, where you check the colors, assign filaments and slice as described above. More in Painting STL files on an iPad or iPhone.
Common questions
Why can’t I find the painting tool in PrusaSlicer?
Select a multi-material printer profile, for example one for a printer with an MMU. Multi-material painting is meant for printers with more than one extruder or filament slot.
How do I erase paint in Bambu Studio?
Select a painting tool other than Gap fill, hold Shift and click or drag with the left mouse button.
Does painting change my STL?
No. The painting is stored in the slicer project. Prusa’s documentation says the model itself is not altered and painted areas can’t be exported as separate parts. Save the project as 3MF to keep the painting.
How do I paint stripes or change color by height?
Use the Height range tool. It colors everything between two heights in one step, even areas that aren’t connected.
Read next
Sources
- Color Painting Tool — Bambu Lab Wiki: the six painting tools and their shortcut keys
- Multi-color printing — Bambu Lab Wiki: filaments in a project, filament per object or part, flushing, AMS mapping
- Multi material painting — Prusa Knowledge Base: brush, smart fill, bucket fill, height range, limits
- Assigning tools / colors / extruders — Prusa Knowledge Base: an extruder per part
- Importing Multi Material model — Prusa Knowledge Base: STL vs. 3MF for multi-material models
- Color Painting — OrcaSlicer Wiki: tools, gap fill and paint penetration layers
- Filament for Features — OrcaSlicer Wiki: a filament for walls, infill and other features
- OrcaSlicer on GitHub — OrcaSlicer project: releases for Windows, macOS and Linux, and its origins