Multicolor 3D printing guides
How to add color to an STL file
Short answer: A standard STL holds only the shape, so you add the color in your slicer: give each part its own filament, paint the surface with the color painting tool, or switch filament at a set height. You can also paint in a separate app and open its painted 3MF. Save the result as a 3MF project, which keeps the parts, colors and filament list together.

Why your STL has no color
An STL file describes the surface of a model as a list of triangles, and nothing else. The Library of Congress, which documents file formats for long-term archiving, puts it plainly: the documented STL specification “has no support for color, texture, or other appearance characteristics.” Bambu Lab’s documentation says the same thing: STL files “only store geometry data.”
That’s why an STL shows up in one solid color in Bambu Studio, PrusaSlicer or OrcaSlicer. The color you see belongs to the filament the slicer assigned, not to the file. To print in several colors, you tell the slicer which areas get which filament. The formats are compared in Do STL files have color? STL vs. 3MF vs. OBJ.
Four ways to add color
| Method | How it works | Good for |
|---|---|---|
| A filament per part | The model consists of separate parts, for example a set of STL files with one per color. You load them as one object and give each part its own filament. | Models designed for multicolor printing, anything with clean part boundaries |
| Paint the surface | The slicer’s painting tool colors the model’s surface with a brush or a fill that stops at edges. | One-piece models such as figures and animals, logos on curved surfaces |
| Color by height | Everything between two heights gets one color, with a height range tool or a filament change at a chosen layer. | Signs, nameplates, stripes, stacked text; also single-extruder printers |
| Paint in another app | A separate program exports a model that already carries colors, such as a painted 3MF, and the slicer opens it with those colors. | Freehand detail, painting away from the computer |
You can combine them: a model that comes in parts can still get painted details on one of its parts.
Method 1: give each part its own filament
When a model comes as several STL files, one per color, load them together. PrusaSlicer then asks whether to treat them as one object with several parts; confirm with Yes. If a single STL contains several separate shells, the Split to parts function in the top toolbar separates them. In PrusaSlicer, select a multi-material printer profile first; Prusa’s guide says the steps won’t work otherwise.
Then pick a filament for each part. In Bambu Studio, choose it in the object list on the left, right-click the part, or select it and press a number key from 1 to 9. In PrusaSlicer, double-click the colored box next to the part in the object list, or press a number key.
Method 2: paint the surface in the slicer
Bambu Studio, PrusaSlicer and OrcaSlicer all have a painting tool for multicolor printing. Bambu Studio and OrcaSlicer call it Color Painting, PrusaSlicer calls it Multi-material painting. You pick a filament, then paint with a brush, fill an area up to its sharp edges, or color everything between two heights. The painting is saved with the project; the model’s shape stays as it was.
The steps for each slicer are in How to paint an STL in Bambu Studio, PrusaSlicer and OrcaSlicer.
Method 3: change color by height
For colors that change along horizontal lines, you don’t have to paint by hand. The height range tool in Bambu Studio and OrcaSlicer, and height range painting in PrusaSlicer, color everything between two heights in one step, even areas that aren’t connected.
A printer with a single extruder and no AMS or MMU can do this too, with a layer color change: the printer pauses at the chosen layer and you swap the filament by hand. Each layer then has only one color, so this suits signs and nameplates, not the eyes of a figure.
Save the result as a 3MF
Once the colors are set, save the slicer project. It’s a 3MF file, and that’s the file to keep and share. Prusa calls saving the project “the ideal way of storing and sharing Multi Material models,” and Bambu Studio saves the project’s filament list in the 3MF and restores it when the file is opened.
Don’t export the model back to STL, or the colors are gone. Painting also doesn’t cut the model into separate shapes: Prusa notes that painted areas can’t be exported as separate parts. If you need one STL per color, you have to cut the model in a modeling program.
Plan the colors around your printer
- Every color change costs filament and time. On a single-nozzle printer with an AMS or MMU, the old filament has to be flushed out before the new color prints cleanly. Bambu Lab notes that more flushing means more wasted filament and a longer print, so fewer color changes per layer save both.
- Avoid specks and gaps. Small unpainted gaps add filament changes. Bambu Studio’s gap fill tool exists to fill them with a neighboring color.
- Very thin lines may not print. PrusaSlicer merges painted areas that are too thin to print into the neighboring color.
- Paint with the filaments you have. When you send a print, Bambu Studio maps the project’s colors to AMS slots by material type and similar color, and you can adjust the mapping by hand.
Where MeshGlaze fits
To be upfront: we make MeshGlaze, an app for painting 3D models on iPad, iPhone and Android. It covers method 4. You import an STL or 3MF, paint it with your finger, Apple Pencil on iPad or a stylus on Android, and export a painted 3MF for Bambu Studio, PrusaSlicer or OrcaSlicer. There you check the colors, assign filaments and slice as usual.
If your model comes in parts or needs only a few fills, the slicer’s own tools are enough and cost nothing. When a tablet or phone is the better place to paint is the topic of Painting STL files on an iPad or iPhone.
All guides
- How to paint an STL in Bambu Studio, PrusaSlicer and OrcaSlicer
Add filaments, open the painting tool, use brush, fill and height range, then match the colors to your AMS or MMU. Step by step, from the official docs.
- Painting STL files on an iPad or iPhone: when it helps
Bambu Studio, PrusaSlicer and OrcaSlicer run on computers. When painting a multicolor model on an iPad or iPhone makes sense, and when the slicer is enough.
- Do STL files have color? STL vs. 3MF vs. OBJ
STL stores only the shape. 3MF can hold colors, parts and slicer settings; OBJ uses a separate MTL file. Which format to use for multicolor 3D printing.
Common questions
Can STL files have color?
Not in the standard format. Some programs write a color into an unused field of binary STL files, but there are two incompatible conventions and no way to tell which one a file uses. For multicolor printing, add the colors in the slicer and save a 3MF.
How do I make a multicolor 3D print file?
Open the model in your slicer, add one filament per color, give each part a filament or paint the surface, and save the project. The saved 3MF keeps the model, the colors and the filament list together.
How do I change the color of an STL file?
The STL itself has no color to change. The color you see in the slicer belongs to the assigned filament. Change that filament’s color, or paint areas with other filaments.
Do I need an AMS or MMU to print in several colors?
Not for color changes by height: a single-extruder printer can pause at a chosen layer for a manual filament swap. Colors that change within one layer, like the eyes on a face, need a multi-material system.
Sources
- STL (STereoLithography) File Format Family — Library of Congress, Sustainability of Digital Formats: no standard color support in STL
- STL (STereoLithography) File Format, Binary — Library of Congress: the 50-byte facet record and the two incompatible color conventions
- Import OBJ — Bambu Lab Wiki: STL stores only geometry; Bambu Studio imports color from OBJ files
- Multi-color printing — Bambu Lab Wiki: filaments in a project, filament per object or part, flushing, AMS mapping
- Color Painting Tool — Bambu Lab Wiki: the six painting tools and their shortcut keys
- Importing Multi Material model — Prusa Knowledge Base: STL vs. 3MF for multi-material models
- Assigning tools / colors / extruders — Prusa Knowledge Base: an extruder per part
- Multi material painting — Prusa Knowledge Base: brush, smart fill, bucket fill, height range, limits
- ColorPrint with the MMU — Prusa Knowledge Base: layer color changes, also on single-material printers
- Color Painting — OrcaSlicer Wiki: tools, gap fill and paint penetration layers